Visitors

Flag Counter

Tuesday, March 5, 2013

Dimboola Railway Accident


STATEMENTS BY PASSENGERS.
We are indebted (says a Melbourne journal) to Mr John Watson, of Brunswick, teacher of navigation, for the following interesting details in connection with the occurrence:-"1 was in the first passenger carriage lying on the front seat, another passenger being seated in the corner. This gentleman had been previously on one of the racks, but a bump of the train caused him to get down and takeupasaferposition. A third Passenger occupied Lue other seat, and a fourth was lying on the floor of the carriage. When the shock came it was five minutes to two. I was awake at the time, but did not move, and I observed that my companion on the floor attempted to rise, but could not. The first sensation was a big jump from the train, and then succeeded a series of rapid strokes, about 10 a second, varied by a heaving movement. The lights of the train were extinguished, and there was a rattling of falling luggage.

After the lapse of half a minute the train came to a standstill, and there were hysterical cries from lady passengers to be let out of the carriages. Most of the passengers appeared to have been lying down, and, fortunately, no one received any injury to speak of. When I got out of the train I found that there had been a narrow escape from a big accident. The engine was 17ft away from the rails, and it was clear that if
we had been on an embankment it would have toppled over, and lives would certainly have been lost. It had ploughed its way through the earth for about 20 or 30 yards, and was embedded up to the bed-plate, the cow-catcher being completely curled up underneain the front. The first two mail vans were also some distance from the rails, while the remaining cars were pretty close to them, and the guard's van had not been displaced. The spot where the accident took place is 20 yards from a culvert, and about seven miles from Dimboola.

Being naturally interested in li1e cause of the accident, I went back on the line
with a fellow-passenger, and G60ft from the point where the engine lay embedded we found a displaced fishplate.  This is supposed to have been moved  by the express train to Adelaide, which passed over the line shortly before, and the origin of the accident is traced to it. The sleeper next to the fishplate was
marked by the flange of a wheel, and the sleepers onwards were cut to pieces. The rails were displaced, those under the first passenger carriage being brought together, and the bogies of the carriages were more or less out of position. The morning was cold, and so the passengers lit a fire with sleeper splin
ters and coals from the engine, round which the ladies crouched for a dreary seven hours.

 There were great complaints about the delay that took place in the despatch of a relief train from Dimboola. It hid not appear on the scene until eight o'clock, and then it took an hour to shift the luggage and mails. The train at the time of the accident was going at its ordinary rate, and it is astonishing to nie that no one was injured. After the occurrence the engine-driver looked all right, but the fireman appeared to be considerably shaken." Mr J. Wallace, another passenger, states:-"We were going into Dimboola
at the rate of about 35 miles an hour when a considerable shock was noticed, and the train was cautiously drawn up. It seemed to me that the engine-driver acted with great discretion in not putting on the Westinghouse brake suddenly. Had he done so I believe the carriages would have telescoped. I
examined the line after the accident, and discovered some distance back two 'kinks' in the rails and a displaced fish plate.

I believe that the twist on the rails threw the engine off its balance, and the fishplate did the rest. I consider it most fortunate that the accident occurred where it did. In an awkward place it would have meant a catastrophe." Mr J. C. Fitzgerald, the Victorian cyclist, who was returning to Melbourne
from the Adelaide race meeting, said: "I was awakened from sleep by the bumping of the train. I remarked to a fellow-passenger that we were travelling at a good speed, and, as he pitched head first into me with another jolt, he agreed we were. Then there were more joltings, and the luggage began to fly round the carriage in a remarkable fashion.

I and my fellow-traveller concluded that the window might afford some explanation, and possibly some escape, so we rushed to it. Our agreement
was so remarkable, however, that we each chose the same moment, and were jammed together in the window. The next Jolt settled the matter, for we were both landed on the ground outside. Fortunately no one was hurt, and when we found that to be the case we made the best of the experience, and told
stories round the fire which we lighted for the ladies with odd junks of sleepers, etc.The smartest man in the whole train at the moment of the crisis was an elderly gentleman who could scarcely move during the first of the journey with rheumatic gout or some such affection. While we were wondering what was wrong, Fix this text he had seized up the whole situation and had leaped from the carriage. And he was as cool as he was smart. When he found how matters stood he crept back into the carriage and was asleep again within a few minutes."

Date: 20 APR 1896

I found the above newspaper article very interesting to read.  Source is http://trove.nla.gov.au

Saturday, March 2, 2013

Re-orentation


I have decided to re-orient the layout.  I wasn't very happy with the fact that the yard tracks had those curves since most yards are straight.   I have kept to the original track plan, only making changes where necessary.  The track-plan has moved 90 Degrees to the left.
This has also being made possible due to the building of a 2.4m x 60cm staging area when my dad was up.  I decided to build this to avoid the hot summer sun hitting the rolling-stock when the shed door was open.  This has helped alleviate the problem.
The changes have brought some additional benefits.
I now have staging on both sides of the layout so it is possible to run the "Overland" when Anthony comes over for a running session next time.  This also enables me to run a "Jet" if the Overland is not run.
The only curved yard tracks are now on Sidings C and D and the silo road and the head shunts on either end.
I still have a road for the loco depot which leads to staging.
The cattle siding has moved to be on the Eastern (Melbourne) side of the layout.
I can now have a proper Goods Shed with enough space at the edge to create some depth immediately across from the station.
I ensured that the yard tracks and Road 2 is long as possible.  I used curved turn-outs to achieve this.
The station is now straight rather than being curved.  At 200 scale metres, it seems to look pretty good (the prototype was 242 metres).

Yes, there are draw backs to the changes.  The incline out of the station area has gone so this reduces modelling scenery to a large extent,  although this looked really nice.

No changes have been made to the operating timetable that Anthony and I used on the first operating session.


Last week, Craig was kind enough to let me borrow his 200mm G Clamp.  This enabled me to cut straight the 100mm diameter PVC pipe which will eventually become a VR Silo.  The G Clamp made all the difference from a straight cut to one that was uneven.  I used a hack-saw to do the job.

Sunday, February 17, 2013

Operations resume

This weekend I was invited to see Anthony's wonderful Border District layout.    He has now implemented "dependant" signalling on the main line, so if one signal displays a yellow, the following displays a red aspect.  This greatly increases the realism and enjoyment level when driving a train as one has to pay attention to the signals.  The effort to implement this would have been incredible.  We ran a few trains until the night became late.  I think Anthony has his layout to a very satisfying plan now where a profound level of operation can be achieved.
I always seem to come away despondent when seeing the Border District!

On my own layout, trains have resumed operations.  The last time any operations were carried out was just before the storm.

However, one thing still bugged me.  Most VR track layouts are designed such that they are straight and seldom the yards are curved.  Due to space restrictions, I began my yard on the curved sections and having wagons stationed there on the curves just didn't look right.   It was 4pm Sunday evening and disillusionment settled in !  I pondered the situation for several minutes, even contemplated to reconsider the track plan!  Suddenly it dawned on me about moving the make-shift gantry I had which resembles the signals for the time being.  Moving the gantry just before where the curves begin to take affect seemed to resolve my dilemma.  Adding another one on the other-side gave me appropriately 300cm of "yard" track.  I think this will do for me!  The only draw back is that the section of "no-mans land" has increased some what but I can live with that :)

Here are some photos.





 Till next time.


Thursday, February 14, 2013

Disaster Struck!

Following the huge downpour and storm we experienced a few weeks ago, a check on the layout revealed moisture had gotten into some of the ply.  On one section of the layout there was a pronouced dip of about 100mm and no matter what I tried to resolve that, with numerous attempts at packing material to even the dip,  it always bugged me and looked bad, it looked even worse after the storm.  The only way to rectify the situation was to rebuild the entire benchwork on that section again, raising the benchwork to the same level as the adjacent one and then continuing the decline to 1375mm from approximately 1385mm.

Lets just say there were alot of expletives used during the process.  I had to rip up track. move the entire 6 or so metres of benchwork to get to the other-side to raise that side and basically start building that section all over again.  The following photo shows the pronounced dip which just didn't look right.



The disaster area!

Shows how much I had to raise this section

Problem Area

Solution :)

I also took the opportunity to increase the radii of my curves.  I just like those lovely broad curves.  The far track - road 5, shows the original curve, with the tracks in the foreground, the new radii curves.  Track 5 will also have the new broad radii curve. 
 One advantage of large radii curves is that you use less track!  The obvious drawback is that you lose space.

I guess the storm was a blessing in disguise.

Till next time.

Sunday, January 27, 2013

Rain Rain Rain and an Op Session

For the last three days, it has been raining incessantly.  We must have received about 100mm+ over that period.  Unfortunately, a visit to the shed today revealed the ply at some sections of the layout had absorbed water and buckled.  Spent most of the day fixing those sections.  Don't know why I layed down 3mm ply. It seems to absorb the moisture like a sponge.  Good thing is I had the time to fix most of it.

Also spent the last two days decaling some wagons.  Still have a few GYs to do and the cattle and sheep stock.

Friday 18th Jan, I had my first operating session with another VR modeller.  We had approximately four hours to run to a schedule.  We didn't have time to complete all movements, but did have alot of fun!



A few enhancements and ideas came out of the session.  Some photos (in no particular order)
We did run the Dimmy pass and since we don't have a Walker Rail motor, ran a T Class loco hauled pass for the branch line service.















Thanks to Anthony for provding the extra motive power and rolling-stock.  Looking forward to the next one.


Sunday, January 13, 2013

Dear Diary




Dear Diary,

Wednesday Dec 4 1974

Decided to spend the afternoon train-spotting and photographing near the station.



The first observation was the Fast Goods ex Melbourne, usually with BMX and BP vans, was seen arriving at Dimboola with VLX vans at about 13:30 hours.  This train usually conveys Newsprint.



No. 142 Goods from Dimboola to Ararat was seen departing late, headed by a B Class.  This train left from what they call "siding A"



At approximately 15:00 hrs No. 36, which is the Fast Goods ex Dimboola, was seen departing.



About a hour later, a single T Class loco was seen running No. 164 Goods, ex Serviceton to Ararat with shunting at Dimboola.  The resident Y class shunter had an engine failure and a T was seen on shunting duties.



An ad-hoc movement, but not surprising to see in December, was a wheat train with shiny new wheat wagons.  The wagons were shunted to the silo road. 16:20 hours.



At about 17:00 hours, the RoadSide Goods No. 61 ex Ararat and terminating at Dimboola, was seen arriving headed by a solo T Class loco.  This train took road 4.  A loaded cattle train was waiting patiently on road 3.



The cattle train was seen leaving, climbing the small grade out of Dimboola. at about 17:10 hours.

Had to then leave for home.

SD

Sunday, December 30, 2012

The End of the year 2012

Well its the penultimate day of 2012 and I wonder whether I have finally found a suitable trackplan which I have currently deployed and borrowed heavily from Dimboola in Western Victoria.  I guess time will tell.  Here are some more photos.




Wishing you all a prosperous 2013.

Followers

Blog Archive